ASK THE EXPERT AT GENE'S WATER & SEWER
This section will address symptoms, causes and repair options first for water issues and then for sewer issues.
Question: What might be causing slow or stopped water flow?
Cause: Most likely cause is a build up of deposits in the water piping system. This issue is accelerated in galvanized or lead pipe.
Repair Options: The affected piping will need to be replaced. Gene's Water & Sewer will assist you in isolating the cause and suggest the best repair solutions from the following:
Trench: Dig an open trench
Tunnel: Use a pneumatic tool "hole hog" to pull pipe in place
Question: What could be causing waste water flow to be slowed or stopped ("sewage back-up")?
Causes: Most often caused by a clogged, broken or displaced sewer pipe between the building and the main.
Repair Option: Gene's Water & Sewer will most often suggest an attempt at cleaning followed by a video camera inspection which will identify the cause and help select the best repair option. Once we have the results of our inspection, we will do a cost/benefit analysis and review the results with you before beginning work. The cost of the video inspection will be applied to the repair if we do the work.
Traditional: Combination of digging and tunneling
Semi-Trenchless: Pipe bursting, new pipe hosted where old pipe was
Trenchless: Resin based pull in place liner hosted in existing pipe, the only true "no dig" technology
Ask Your Own Question Here: